Drive-in thermocouple | fibreglass | Type K | 2x 0.5 mm

Inline thermocouple Type K, NiCr-Ni

• Temperature measurment: up to +1,000°C
• Wire type: Fibreglass/fibreglass, 0.5 mm, wire, Tmax: +450 °C

Description

The drive-in thermocouple is particularly suitable for measuring the temperature of brake discs or pads. It can be hammered into a hole and measure the temperature by grinding. The design also allows measurements to be taken over a longer period of time. The head can be ground down with the brake pad without losing its function. Temperatures of up to 1000°C can be measured on the measuring head.

Technical data

• Thermocouple pairing: Type K, NiCr-Ni
• Limiting deviation: Cl. 1 as per DIN EN 60584-1: 2014-07
• Head:  Stainless steel, ∅3,0 x 3,5mm
• Conductor: Fibreglass G/G24-KK-IEC
• Conductor: Wire, 2 x 0.5 mm
• Insolation: Fibreglass
• Operating temperature: up to +450 °C
• Wire dimension: approx. 2.1 x 1.5 mm
• Wire length: 500–1,500 mm
• Connection: Selection

Limiting deviation

Class 1 as per DIN EN 60584-1: 2014-07

• -40 °C to +375 °C            = ± 1,5 °C
• +375 °C to +1.000 °C     = ± 0,004 x |t|

Discount on large quantities on request