Panel Miniature inserts

• Panel Miniature Insert (PMI)





Use:
Built-in couplings for assembly with panel kits into
complete miniature panels.

Mechanical design:

• Housing of high quality fibreglass-filled thermoplastic plastic.
• Contacts of original thermocouple materials.
• Spring-loaded sockets.
• Reverse polarity protection by different contact pin widths.
• Moulded barriers prevent short-circuits.

• Screw terminals enable quick connection.
• Polarity designation next to the connection screws.


Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm.
• Max. cable diameter 4.5 mm.


Temperature load:

• Max. 200 °C.


Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.


Article number:

• PMI-XX – last two characters ‘XX’ see table.
• Example: PMI-KI = Panel Miniature Insert Type “K”, green.
• Panel Miniature Locking Insert (PMLI)





Use:
Built-in couplings for assembly with panel kits into complete miniature panels.

Advantage:
Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP- and miniature jack CMJ-XX.

Mechanical design:

• Housing of high quality fibreglass-filled thermoplastic plastic.
• Contacts of original thermocouple materials.
• Spring-loaded sockets.
• Reverse polarity protection by different contact pin widths.
• Conductor guides for prevention of short-circuits.
• Screw terminals enable quick connection.
• Polarity designation next to the connection screws.


Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm.
• Max. cable diameter 4.5 mm.


Temperature load:

• Max. 200 °C.


Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.


Article number:

• PMLI-XX – last two characters ‘XX’ see table.
• Example: PMLI-KI = Panel Miniature Locking Insert Type “K”, green.
• Panel Miniature Insert Flanged (PMIFB)





Use:
Panel insert for thermocouple and RTD circuits. Mounting by means of stainless steel bracket and two screws or with a stainless steel clip-spring. Ideal panelinsert for instrument cases. Mechanical design:

Mechanical design:

• Housing of fibreglass-filled plastic.
• Contacts of original thermocouple materials.

• Spring-loaded sockets.
• Reverse polarity protection by different contact pin widths.
• Moulded barriers prevent short-circuits.

• Screw terminals enable quick connection.
• Polarity indication on body.


Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm.
• Max. cable diameter 4.5 mm.


Temperature load:

• Max. 200 °C.


Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.


Article number:

• PMIFB-XX – last two characters ‘XX’ see table.
• Example: PMIFB-KI = Panel Miniature Insert Flanged Type “K”, green.



• Panel Miniature Insert Lugged (PMIL)





Use:
Single built-in sockets for installation in front plates, measuring device housings, etc.
Attachment with two screws M 2.5.

Mechanical design:

• Housing of fibreglass-filled plastic.
• Contacts of original thermocouple materials.
• Spring-loaded sockets.
• Reverse polarity protection by different contact pin widths.
• Moulded barriers prevent short-circuits.

• Screw terminals enable quick connection.
• Polarity indication on body.


Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm.
• Max. cable diameter 4.5 mm.


Temperature load:

• Max. 200 °C.


Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.


Article number:

• PMIL-XX – last two characters ‘XX’ see table.
• Example: PMIL-KI = Panel Miniature Insert Lugged Type “K”, green.



• Panel Miniature Insert Round Direct Mount (PMIR)





Use:
Panel insert for thermocouple and RTD circuits. Mounting by means of two screws at front hole with a diameter of 22.5 mm. Ideal panelinsert for instrument cases.

Mechanical design:

• Housing of fibreglass-filled plastic.
• Contacts of original thermocouple materials.
• Spring-loaded sockets.
• Reverse polarity protection by different contact pin widths.
• Moulded barriers prevent short-circuits.
• Screw terminals enable quick connection.
• Polarity indication on body.
• Stainless steel screws and brackets for front mounting.


Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm diameter.


Temperature load:

• Max. 200 °C.


Colour designations:

• ANSI colour designation ex-stock.
  All international colour designations are available.


Article number:

• PMIR-xx – last two characters ‘xx’ see table.
• Example: PMIR-KI = Panel Miniature Insert Direct Mount Type “K”, green.



• Panel Miniature Insert Three-pin Lugged (PMITL)





Use:
Single built-in couplings for installation in front plates, housings, etc. Attachment with two screws M 2.5. Third connection for ground or continuous shield or three wire RTD.

Mechanical design:

• Housing of fibreglass-filled plastic.
• Contacts of original thermocouple materials.
• Spring-loaded sockets.
• Reverse polarity protection by different contact pin widths.
• Moulded barriers prevent short-circuits.
• Screw terminals enable quick connection.
• Polarity indication on body.
• Stainless steel screws and brackets for front mounting.


Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm.
• Max. cable diameter 4.5 mm.


Temperature load:

• Max. 200 °C.


Colour designations:

• All international colour designations are available
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.


Article number:

• PMITL-XX – last two characters ‘XX’ see table.
• Example: PMITL-KI = Panel Miniature Insert Three-pin Lugged Type “K”, green.