Miniature connectors
Accessories Miniature
- Grommet
- Silicone ring, slit for easy mounting over wire. Will compress on the wire when the cover is fitted.
- Max. 200 °C.
- A-20.031-1 – 3.0 mm
- A-20.031-2 – 0.5 mm
- A-20.031-3 – 1.5 mm
- Crimp Insert
- Brass machined, nickel plated insert with 0.1 mm tolerance on the cable OD.
- A-20.024-1 – 1.1 / 2.4
- A-20.024-2 – 1.6 / 2.4
- A-20.024-3 – 1.7 / 2.4
- A-20.024-4 – 2.1 / 3.2
- A-20.024-5 – 2.4 / 3.2
- A-20.024-6 – 3.1 / 4.5
- A-20.024-7 – 3.3 / 4.5
- A-20.024-8 – Blind / 4.5
- A-20.024-9 – 3.9 / 4.5
- A-20.024-12 – 1.9 / 3.2
- A-20.024-13 – 3.5 / 4.5
- A-20.051-1 – 5.0 / 5.8
- A-20.225 – 0.6 / 2.4
- A-20.279* – 1.1 / 4.3
*) Only for rectangular ceramic connectors, 5 mm. - Wire insert
- Thermoplastic material with a round or oval hole fit around a specific wire.
- A-20.075-1 – R / Wire Ø 1.5 mm
- A-20.075-5 – R / Wire Ø 3.5 mm
- A-20.075-24 – O / Wire 2.0 mm x 1.5 mm
- Locking Clip
- Glass filled thermoplastic with the same temperature rating as the connector body (200 °C) Red colour indicated clearly that the circuits are protected.
- Can be placed and removed without any tools.
- A-20.096
- Wire Clamp Bracket
- Silicone cover with retention ring prevent disconnection due to vibration. Tapered entrance hole to ensure proper sealing on most cable diameters.
- A-20.050-1 Two-pin connector 200 °C (transparent)
- A-20.050-2 Three-pin connector 200 °C (transparent)
- A-20.050-3 Two-pin connector 300 °C (Black)
- Protection Boot
- Simply slip the sleeves backwards over the connectiors, overlapping them by approx. 3 – 4 mm.
- Also prevents possible detachment of the connectiors under high vibration.
- Max. 200 °C.
- A-20.030-1
- Bending Protection
- Silicone rubber insert, tapered entrance hole ensures proper sealing on cable.
- Max. 200 °C.
- A-20.293
Use:
Grommet can be fitted in the entrance hole of the connector to prevent moisture and dirt from entering the connector. Has limited strain relief capabilities.
Temperature load:
Order no. – Dimension A (mm)
Use:
Designed for soldering or crimping on mineral insulated sheath cable or crimping on insulated wire.
Order no. – Dimension A (mm) / Dimension B (mm)
Application:
A set wire inserts fitted in the entrance hole of the connector will provide a very good strain relief without any protruding parts from the connector.
Order no. – Round/Oval / Dimension A (mm) / Dimension B (mm)
Miniature connectors donot have a retention groove. In order to prevent accidental disconnection a locking plate can be used.
Construction:
Order no.:
Application:
Wire clamp bracket will provide optimum strain relief. Construction allows a large difference in maximum and minimum wire diameter.
Order no.:
Two identical silicon sleeves enclose the connectors and wires. This provides good protection against spray water and dirt.
Installation:
Temperature load:
Order no.:
Use:
Link bending protection for miniature connectors.
Application:
Bending protection for thermocouples and wire being used with miniature connectors. Prevents mechanical damage of wires at entrance point of the connector.
Construction:
Temperature Rating:
Order no.: