Use:
Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables.

Mechanical design:

• Housing of high quality fibreglass-filled thermoplastic plastic.
• Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact.
• Easy wire connection through sandwich construction.
  

• Reverse polarity protection by different contact pin widths.
• One-piece housing withstands great stresses.
• Moulded barriers prevent short circuit.
• Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm diameter.
• Max. cable diameter 4.5 mm.

Temperature load:

• Max. 250 °C.
  

Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Accessories:

• Strain-relief fittings, sealing ring, spray water protection etc.,
  see data sheet „Accessories for miniature connectors“.
  
  

Article number:

• Connector plug: CMP-XX – last two characters ‘XX’ see table.
• Connector jack: CMJ-XX – Example: CMP-KI = Connector Miniature Jack Type “K”, green.

Use:
Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables.

Advantage:
Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX.

Mechanical design:

• Housing of high quality fibreglass-filled thermoplastic plastic.
• Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact.
  
• Reverse polarity protection by different contact pin widths.
• One-piece housing withstands great stresses.
• Moulded barriers prevent short circuit.
• Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm diameter.
• Max. cable diameter 4.5 mm.

Temperature load:

• Max. 250 °C.
  

Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Accessories:

• Strain-relief fittings, sealing ring, spray water protection etc.,
  see data sheet „Accessories for miniature connectors“.
  
  

Article number:

• Connector plug: CMLP-XX – last two characters ‘XX’ see table.
• Connector jack: CMLJ-XX – Example: CMLP-KI = Connector Miniature Locking, Type “K”, green.

Use:
Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables.

Mechanical design:

• Ceramic housing with contacts of original thermocouple materials and 
spring-loaded sockets for reliable contact .
• Reverse polarity protection by different contact pin widths.
• Oversize screw head for easy wiring.

• One-piece housing withstands great stresses.
• Housing of high purity alumina oxide.

Conductor diameter:

• Reliable connection from 0.1 mm to 0.6 mm diameter.
• Max. cable diameter 4.5 mm.

Temperature load:

• Max. 650 °C.

Colour designations:

• White housing with colour dot as designation.

Accessories:

• Crimp-inserts and wire clamp bracket available, please ask for separate specification sheet: request.

Article number:

• Connector plug: CMPC-XX – last two characters ‘XX’ see table.
• Connector jack: CMJC-XX – Example: CMPC-KI = Connector Miniature Ceramic Type “K”, green.

Use:
Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Can be used for 4-wire RTD‘s.

Mechanical design:

• Housing of high quality fibreglass-filled thermoplastic plastic.
• Contacts of original thermocouple materials and
  spring-loaded sockets for reliable contact.
• Reverse polarity protection by different contact pin widths.
• One-piece housing withstands great stresses.
• Moulded barriers prevent short circuit.
• Screw terminals enable quick connection.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm diameter.
• Max. cable diameter 4.5 mm.

Temperature load:

• Max. 200 °C.

Colour designations:

• The housing colour is white and the thermo-pairing is imprinted.
• Colour dot as special version at extra price.

Accessories:

• Strain-relief fittings, sealing ring, etc.,
  see separate specification sheet "Accessories for miniature connectors".

Article number:

• Connector plug: CMPD-XX – last two characters ‘XX’ see table.
• Connector jack: CMJD-XX – Example: CMPD-KI = Connector Miniature Duplex Connector Type “K”, green.

Use:
Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables.

Mechanical design:

• Housing of fibreglass-filled plastic.
• Contacts of original thermocouple materials and
  spring-loaded sockets for reliable contact.
• Reverse polarity protection by different contact pin widths.
• One-piece housing withstands great stresses.
• Moulded barriers prevent short circuit.
• Screw terminals enable quick connection.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm diameter.
• Max. cable diameter 4.5 mm.

Temperature load:

• Max. 350 °C.

Colour designations:

• The housing colour is brown and the thermo-pairing is imprinted.
• Colour dot as special version at extra price.

Accessories:

• Strain-relief fittings, sealing ring, spray water protection etc.,
  see data sheet "Accessories for miniature connectors".

Article number:

• Connector plug: CMPH-XX– last two characters ‘XX’ see table.
• Connector jack: CMJH-XX – Example: CMPH-KI = Connector Miniature High-temperature NiCr-Ni Type K.

Use:
Connectors for thermocouples and RTD circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Third connection for ground or continuous shield connection or for three wire RTD´s.

Mechanical design:

• Housing of fibreglass-filled plastic.

• Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact.
• Reverse polarity protection by different contact pin widths.
• One-piece housing withstands great stresses.
• Moulded barriers prevent short circuit.
• Screw terminals enable quick connection.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm diameter.
• Max. cable diameter 4.5 mm.

Temperature load:

• Max. 200 °C.

Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.
  

Accessories:

• Strain-relief fittings, sealing ring, spray water protection etc.,
  see separate specification sheet "Accessories for miniature connectors".

Article number:

• Connector plug: CMC-XX – last two characters ‘XX’ see table.
• Connector jack: CMJT-XX – Example: CMPT-KI = Connector Miniature Three-pin Type “K”, green.

Use:
Built-in couplings for assembly with panel kits into
complete miniature panels.

Mechanical design:

• Housing of high quality fibreglass-filled thermoplastic plastic.
• Contacts of original thermocouple materials.
• Spring-loaded sockets.
• Reverse polarity protection by different contact pin widths.
• Moulded barriers prevent short-circuits.

• Screw terminals enable quick connection.
• Polarity designation next to the connection screws.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm.
• Max. cable diameter 4.5 mm.

Temperature load:

• Max. 200 °C.

Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Article number:

• PMI-XX – last two characters ‘XX’ see table.
• Example: PMI-KI = Panel Miniature Insert Type “K”, green.

Use:
Built-in couplings for assembly with panel kits into complete miniature panels.

Advantage:
Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP- and miniature jack CMJ-XX.

Mechanical design:

• Housing of high quality fibreglass-filled thermoplastic plastic.
• Contacts of original thermocouple materials.
• Spring-loaded sockets.
• Reverse polarity protection by different contact pin widths.
• Conductor guides for prevention of short-circuits.
• Screw terminals enable quick connection.
• Polarity designation next to the connection screws.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm.
• Max. cable diameter 4.5 mm.

Temperature load:

• Max. 200 °C.

Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Article number:

• PMLI-XX – last two characters ‘XX’ see table.
• Example: PMLI-KI = Panel Miniature Locking Insert Type “K”, green.

Use:
Panel insert for thermocouple and RTD circuits. Mounting by means of stainless steel bracket and two screws or with a stainless steel clip-spring. Ideal panelinsert for instrument cases. Mechanical design:

Mechanical design:

• Housing of fibreglass-filled plastic.
• Contacts of original thermocouple materials.

• Spring-loaded sockets.
• Reverse polarity protection by different contact pin widths.
• Moulded barriers prevent short-circuits.

• Screw terminals enable quick connection.
• Polarity indication on body.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm.
• Max. cable diameter 4.5 mm.

Temperature load:

• Max. 200 °C.

Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Article number:

• PMIFB-XX – last two characters ‘XX’ see table.
• Example: PMIFB-KI = Panel Miniature Insert Flanged Type “K”, green.

Use:
Single built-in sockets for installation in front plates, measuring device housings, etc.
Attachment with two screws M 2.5.

Mechanical design:

• Housing of fibreglass-filled plastic.
• Contacts of original thermocouple materials.
• Spring-loaded sockets.
• Reverse polarity protection by different contact pin widths.
• Moulded barriers prevent short-circuits.

• Screw terminals enable quick connection.
• Polarity indication on body.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm.
• Max. cable diameter 4.5 mm.

Temperature load:

• Max. 200 °C.

Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Article number:

• PMIL-XX – last two characters ‘XX’ see table.
• Example: PMIL-KI = Panel Miniature Insert Lugged Type “K”, green.

Use:
Panel insert for thermocouple and RTD circuits. Mounting by means of two screws at front hole with a diameter of 22.5 mm. Ideal panelinsert for instrument cases.

Mechanical design:

• Housing of fibreglass-filled plastic.
• Contacts of original thermocouple materials.
• Spring-loaded sockets.
• Reverse polarity protection by different contact pin widths.
• Moulded barriers prevent short-circuits.
• Screw terminals enable quick connection.
• Polarity indication on body.
• Stainless steel screws and brackets for front mounting.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm diameter.

Temperature load:

• Max. 200 °C.

Colour designations:

• ANSI colour designation ex-stock.
  All international colour designations are available.

Article number:

• PMIR-xx – last two characters ‘xx’ see table.
• Example: PMIR-KI = Panel Miniature Insert Direct Mount Type “K”, green.

Use:
Single built-in couplings for installation in front plates, housings, etc. Attachment with two screws M 2.5. Third connection for ground or continuous shield or three wire RTD.

Mechanical design:

• Housing of fibreglass-filled plastic.
• Contacts of original thermocouple materials.
• Spring-loaded sockets.
• Reverse polarity protection by different contact pin widths.
• Moulded barriers prevent short-circuits.
• Screw terminals enable quick connection.
• Polarity indication on body.
• Stainless steel screws and brackets for front mounting.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm.
• Max. cable diameter 4.5 mm.

Temperature load:

• Max. 200 °C.

Colour designations:

• All international colour designations are available
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Article number:

• PMITL-XX – last two characters ‘XX’ see table.
• Example: PMITL-KI = Panel Miniature Insert Three-pin Lugged Type “K”, green.

Use:
Installation clamp for ceramic jack, high-temperature Jack or miniature jack for panel installation. .

Mechanical design:

• All parts, including the screws, are made of stainless steel.

Order no.:

• A-20.210 Clamp for ceramic jack.
• A-20.210-2 Clamp for high-temperature jack.

Use:
Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc.

Mechanical design:

• Aluminium front plate, anodised, protected against corrosion.
• Measurement circuit numbering, abrasion- and wipe-proof.
• Attachments of stainless steel and nickel-plated brass.
• The assembly type and design prevent the fitted built-in couplings from being pushed in or out.
• The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition.
• Individual built-in couplings can be replaced by loosening only a few screws.
• Flat, flush front surface enables easy cleaning.
• Standard panels with 1, 3, 6, 8, 12, 18 and 24 built-in jacks.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm diameter.

Temperature load:

• Max 200° C.

Article number:

• PAM-XX — last character ‘XX’ see table.

Use:
Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc.

Advantage:
Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with Connector Mininiature CMP-XX.

Mechanical design:

• Aluminium front plate, anodised, protected against corrosion.
• Measurement circuit numbering, abrasion- and wipe-proof.
• Attachments of stainless steel and nickel-plated brass.
• Montageart und Konstruktion verhindern ein Hinein- oder Herausdrücken der montierten Einbau-Kupplungen.
• The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition.
• Individual built-in couplings can be replaced by loosening only a few screws.
• Flat, flush front surface enables easy cleaning.
• Standard panels with 1, 3, 6, 8, 12, 18 and 24 built-in jacks.

Conductor diameter:

• Reliable connection from 0.002 mm to 0.6 mm diameter.

Temperature load:

• Max 200° C.

Article number:

• PAML-XX — last character ‘XX’ see table.

Use:

Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet.

Mechanical design:

• Housing of fibreglass-filled plastic.
• Contacts of original thermocouple materials and spring-loaded sockets for reliable contact.
• Reverse polarity protection by different contact pin widths.
• One-piece housing withstands great stresses.

Temperature load:

• Max. 200 °C.

Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Article number:

• CMJ-XXPC – last two characters ‘XX’ see table.
• Example: CMJ-KIPC = Connector Miniatur Jack Type “K”, green.

Use:
Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet.

Mechanical design:

• Housing of fibreglass-filled plastic.
• Contacts of original thermocouple material and spring-loaded sockets for reliable contact.
• Moulded barriers prevent short-circuits.

• Reverse polarity protection by different contact pin widths.
• One-piece housing withstands great stresses.

Temperature load:

• Max. 200 °C.

Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Article number:

• CMJ-XXPR – last two characters ‘XX’ see table.
• Example: CMJ-KIPR = Connector Miniature Jack Type “K”, green.

Use:
Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet.

Mechanical design:

• Housing of fibreglass-filled plastic.
• Contacts of original thermocouple materials and
  spring-loaded sockets for reliable contact.
• Moulded barriers prevent short-circuits.
• Reverse polarity protection by different contact pin widths.
• One-piece housing withstands great stresses.

Temperature load:

• Max. 200 °C.

Colour designations:

• All international colour designations are available:
  DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Article number:

• CMJ-XXPS – last two characters ‘XX’ see table.
• Example: CMJ-KIPS = Connector Miniature Jack Type “K”, green.

Use:
Grommet can be fitted in the entrance hole of the connector to prevent moisture and dirt from entering the connector. Has limited strain relief capabilities.

Construction:

• Silicone ring, slit for easy mounting over wire. Will compress on the wire when the cover is fitted.

Temperature load:

• Max. 200 °C.

Order no.     –    Dimension A (mm)

• A-20.031-1   –    3.0 mm
• A-20.031-2   –    0.5 mm
• A-20.031-3   –    1.5 mm

Use:
Designed for soldering or crimping on mineral insulated sheath cable or crimping on insulated wire.

Construction:

• Brass machined, nickel plated insert with 0.1 mm tolerance on the cable OD.

Order no. – Dimension A (mm) / Dimension B (mm)

• A-20.024-1      –    1.1  /   2.4
• A-20.024-2      –    1.6  /   2.4
• A-20.024-3      –    1.7  /   2.4
• A-20.024-4      –    2.1  /   3.2
• A-20.024-5      –    2.4  /   3.2
• A-20.024-6      –    3.1  /    4.5
• A-20.024-7      –    3.3  /   4.5
• A-20.024-8      –    Blind  /   4.5
• A-20.024-9      –    3.9  /   4.5
• A-20.024-12    –    1.9  /   3.2
• A-20.024-13    –    3.5  /   4.5
• A-20.051-1      –    5.0  /   5.8
• A-20.225         –     0.6  /   2.4
• A-20.279*        –    1.1  /   4.3
  
  *) Only for rectangular ceramic connectors, 5 mm.

Application:
A set wire inserts fitted in the entrance hole of the connector will provide a very good strain relief without any protruding parts from the connector.

Construction:

• Thermoplastic material with a round or oval hole fit around a specific wire.

Order no.   –    Round/Oval  /   Dimension A (mm)  /   Dimension B (mm)

• A-20.075-1     –    R  / Wire Ø 1.5 mm
• A-20.075-5     –    R  / Wire Ø 3.5 mm
• A-20.075-24   –    O  / Wire 2.0 mm x 1.5 mm

Application: :
Miniature connectors donot have a retention groove. In order to prevent accidental disconnection a locking plate can be used.

Construction:

• Glass filled thermoplastic with the same temperature rating as the connector body (200 °C) Red colour indicated clearly that the circuits are protected.
• Can be placed and removed without any tools.

Order no.:

• A-20.096

Application:
Wire clamp bracket will provide optimum strain relief. Construction allows a large difference in maximum and minimum wire diameter.

Construction:

• Silicone cover with retention ring prevent disconnection due to vibration. Tapered entrance hole to ensure proper sealing on most cable diameters.

Order no.:

• A-20.050-1 Two-pin connector 200 °C (transparent)
• A-20.050-2 Three-pin connector 200 °C (transparent)
• A-20.050-3 Two-pin connector 300 °C (Black)

Use:
Two identical silicon sleeves enclose the connectors and wires. This provides good protection against spray water and dirt.

Installation:

• Simply slip the sleeves backwards over the connectiors, overlapping them by approx. 3 – 4 mm.
• Also prevents possible detachment of the connectiors under high vibration.

Temperature load:

• Max. 200 °C.

Order no.:

• A-20.030-1

 

Use:
Link bending protection for miniature connectors.

Application:
Bending protection for thermocouples and wire being used with miniature connectors. Prevents mechanical damage of wires at entrance point of the connector.

Construction:

• Silicone rubber insert, tapered entrance hole ensures proper sealing on cable.

Temperature Rating:

• Max. 200 °C.

Order no.:

• A-20.293